Skip to content
Reroot Bio

Wholesale & Custom Trash Bags

Trash Bags & Bin Liners for Wholesale

Compare seven trash bag and bin-liner references across ordinary roll, perforated roll and drawstring formats. Start with the bag dimensions and thickness, then compare bags per roll and total bags per carton.

Catalogue range
7 configurations · 3 formats
Compare by
Bag size, thickness, roll packing and MOQ
Branding brief
Print, roll label, retail pack and carton needs

Choose your trash bag format

Two Rolls. Different Carton Counts.

Both references list 20 rolls per carton. The bags per roll change the total: 25 × 20 = 500 bags, while 12 × 20 = 240 bags. Compare size, thickness and bag count together.

Source: published supplier catalogue references. Carton totals are packing counts, not current stock.

Choose · Compare · Request a quote

Start with the format your range needs

Select a reference to review its full facts. Dimensions, packing and minimum quantities belong to the individual configuration.

2 catalogue references

Perforated Roll Bags

Compare two folded-dimension references. Confirm the gusset convention, separation point and roll-loading arrangement on a sample.

1 catalogue reference

Drawstring Roll Bags

Review the drawstring roll reference with a confirmed size of 400 × 500 mm. Confirm the drawstring details and carton specification before ordering.

Compare trash bag sizes, packing & MOQ

These are catalogue reference configurations. Final dimensions, material formulation, tolerances, packing and order quantities are confirmed in the quotation and approved specification.

Catalogue material description · PBAT + PLA + corn starch

Catalogue colours · Natural / Green

Scroll the table to see all columns.

Catalogue size and packing references
Reference / FormatDimensionsThicknessPackingMOQ reference / bagsEnquire
Catalogue reference 01-01 · Roll Bags 42.93 × 44.96 cm 18 μm Bags / roll 25; Rolls / carton 20; Bags / carton 500 120,000 Request a Quote
Catalogue reference 01-02 · Roll Bags 60.96 × 81.28 cm 22 μm Bags / roll 12; Rolls / carton 20; Bags / carton 240 40,000 Request a Quote
Catalogue reference 01-03 · Roll Bags 76.2 × 83.8 cm 23 μm Bags / roll 10; Rolls / carton 15; Bags / carton 150 30,000 Request a Quote
Catalogue reference 01-04 · Roll Bags 120 × 138 cm 23 μm Bags / roll 10; Rolls / carton 15; Bags / carton 150 20,000 Request a Quote
Catalogue reference 06-01 · Perforated Roll Bags (22 + 11 × 2) × 48 cm 18 μm Bags / roll 10; Rolls / carton 15; Bags / carton 150 50,000 Request a Quote
Catalogue reference 06-02 · Perforated Roll Bags (30 + 15 × 2) × 70 cm 20 μm Bags / roll 10; Rolls / carton 12; Bags / carton 120 50,000 Request a Quote
Catalogue reference 11-01 · Drawstring Roll Bags 400 × 500 mm 30 μm Bags / roll 20 50,000 Request a Quote

Bin Fit Comes Before a Capacity Label

Measure the rim or opening and the internal depth. Leave enough bag above the rim for folding and closing. A litre or gallon label does not describe a bin’s shape, so it cannot establish the correct flat bag size. Try the selected liner in the actual bin.

Bin drawing showing rim circumference, inside depth and fold-over allowance
Bin fit schematic · check with an actual sample

The Drawstring Reference

Reference 11-01 lists 400 × 500 mm, 30 μm and 20 bags per roll. The size unit was confirmed by the brand owner. Carton packing still needs agreement. Include the drawing and drawstring components when requesting finished-bag documents.

Food-Waste Collection and Printed Retail Packs

For a collection programme, name the operator and its accepted liner requirements. For a retail range, specify the artwork, roll label, consumer-pack count and carton marks. Material composition alone does not prove finished-bag certification, leak resistance or acceptance by a collection programme.

Why does my kitchen bin liner slip inside when I add food scraps?

Watch when the liner first moves. A bag that drops when you add the first scraps needs a different adjustment from one that comes loose each time the lid opens. You can tell the two apart with the bin you already use and a clean, dry test load.

Mark the fold and check the bottom

Fit a fresh liner as usual. Make two small pencil or tape marks on the bag where opposite edges fold over the rim. With the lid open, place a rolled tea towel at the bottom. Can you set it on the base of the bin without dragging either mark inside? If the bag hangs like a hammock, try more usable depth before changing the width.

See what the lid does to an empty liner

Remove the towel, refit the cuff and operate the lid or removable inner bucket as you normally would. Look at the marks after each movement. If only the hinge-side mark shifts, watch where the rim or lid catches the film. Reseat the fold or the retaining ring, if the bin has one, then repeat with the same bag.

Change one dimension or one fitting detail

If the bottom is supported and the lid clears the cuff, add the same dry items a few at a time. Note whether the whole cuff slides or a single corner pulls in. Compare the next sample in the same bin, with the same fold and load. Changing both fold depth and bag size at once makes a better result hard to explain.

For a sample enquiry, attach a side view of the fitted cuff and the two mark positions after loading. Give the inside depth, rim measurements and sample reference, and say whether the first movement happened during loading or lid operation.

Request Samples

Buying Questions

What is the minimum order quantity for trash bags?

Each catalogue row lists its own MOQ reference in bags. Different sizes, print versions and packaging requirements need separate review. Select the configuration and send the quantity with its unit; the final order quantity and commercial terms are confirmed in the quotation.

Can I choose a liner from the bin capacity in litres?

Capacity alone does not identify the opening shape, height or closing allowance. Send the opening measurements or rim circumference, internal height and a photo, together with the current liner dimensions if available. A fit check on the actual bin is needed before the size is approved.

Are the bags suitable for wet kitchen waste?

Describe the intended contents, moisture, expected filled weight, holding time and removal routine. Ask to assess a sample under those conditions. No leak-resistance, load capacity or holding-time result is established by the catalogue dimensions or thickness alone.

Can I use my logo and retail packaging?

Include the chosen reference, print sides and colours, artwork, barcode, bags per roll or consumer pack, and case requirements. We review the proposed print and packing specification before confirming feasibility, quantities and pricing.

Does the material description prove compostability?

No. Request current evidence for the proposed finished bag, including its thickness, print and added components. Review home and industrial composting requirements separately, and check the receiving programme’s own acceptance rules. A material description or concept image is not a product certificate.

Send Your Liner Size and Packing Count

Include the reference, quantity unit, artwork and destination. Photos and drawings can be sent by email.