Skip to content
Reroot Bio

Retail & Carry Packaging

T-Shirt & Handle Carrier Bags for Retail

Choose loose-packed or roll-packed carrier bags for the way staff take the next bag. Compare original gusset dimensions, thickness and carton counts, then add your artwork and quantity.

Supply formats
Loose-packed and roll-packed references
Compare by
Folded dimensions, handles and bags per carton

Loose-Packed or on a Roll?

Loose bags can be taken from a stack; roll-packed bags have a separate bags-per-roll count. Keep the supplier’s folded-dimension notation when comparing the two formats.

Source: published supplier catalogue references. Carton totals are packing counts, not current stock.

Catalogue configurations

These are catalogue reference configurations. Final dimensions, material formulation, tolerances, packing and order quantities are confirmed in the quotation and approved specification.

Catalogue material description · PBAT + PLA + corn starch

Catalogue colours · Natural / Green

Scroll the table to see all columns.

Catalogue size and packing references
Reference / FormatDimensionsThicknessPackingMOQ reference / bagsEnquire
Catalogue reference 02-01 · Loose-packed T-shirt Bags (28 + 7 × 2) × 41 cm 20 μm Bags / carton 1000 170,000 Request a Quote
Catalogue reference 02-02 · Loose-packed T-shirt Bags (30 + 7.5 × 2) × 55 cm 22 μm Bags / carton 1000 70,000 Request a Quote
Catalogue reference 02-03 · Loose-packed T-shirt Bags (38 + 9 × 2) × 66 cm 25 μm Bags / carton 1000 50,000 Request a Quote
Catalogue reference 04-01 · Roll-packed T-shirt Bags A (20 + 9 × 2) × 48 cm 20 μm Bags / roll 100; Rolls / carton 6; Bags / carton 600 50,000 Request a Quote
Catalogue reference 04-02 · Roll-packed T-shirt Bags A (30 + 10 × 2) × 55 cm 22 μm Bags / roll 100; Rolls / carton 6; Bags / carton 600 50,000 Request a Quote
Catalogue reference 05-01 · Roll-packed T-shirt Bags B (22 + 11 × 2) × 58 cm 18 μm Bags / roll 15; Rolls / carton 15; Bags / carton 225 50,000 Request a Quote
Catalogue reference 05-02 · Roll-packed T-shirt Bags B (30 + 15 × 2) × 80 cm 20 μm Bags / roll 10; Rolls / carton 12; Bags / carton 120 50,000 Request a Quote
Catalogue reference 12-01 · Handle-bag Enquiry 350 × 450 mm 35 μm Bags / carton 500 50,000 Request a Quote

Keep the Gusset Notation on the Drawing

The expression (28 + 7 × 2) × 41 cm contains folded sections. It is not an instruction to replace the width with one expanded number. Mark the body width, each gusset, handle rise and usable opening on the drawing before placing artwork.

T-Shirt Carrier Bags and Garment Bags Serve Different Jobs

T-shirt describes the carrier-bag shape here. These bags are for carrying items at checkout or distribution. For a folded shirt or textile set inside a protective pack, use the custom garment-bag page instead.

Custom Garment Bags

Handle-Bag Reference and Print Placement

The handle-bag reference 12-01 lists 350 × 450 mm at 35 μm. The unit was confirmed by the brand owner. Keep the handles, folds and seams clear on the artwork drawing, and use representative contents for the sample check. Catalogue images do not establish a carrying-load rating.

How do I keep a takeaway box level in a vest carrier bag?

A box can pass through the bag opening and still tip the moment someone lifts the handles. For a trial at the counter, use the actual lidded carton with a dry dummy load secured inside. Mark one edge of the lid so a change of angle is easy to spot.

Find the point where the box first tilts

Open the side gussets and lower the carton onto the counter through the bag. See whether its whole base rests flat or a corner sits on a folded section. Turn the carton a quarter turn and repeat. If just one orientation works, mark that loading direction on the packing note.

Lift both handles together

With the box level, bring the handles together over its centre and lift just clear of the counter. Watch which side rises first. A corner already off the counter suggests a base-fit issue. A box that tilts only when a handle becomes taut calls for a closer look at the fold and the clearance on that side.

Repeat the handover with the same order

Walk the usual short route to the collection point, set the bag down and inspect the carton again. Compare one alternative at a time, such as a different bag width or packing direction. If the box slides inside a roomier sample, record that alongside any improvement in loading.

Keep the carton footprint, orientation, sample code and a photo taken at the first tilt. Specify the combination that kept this order level during the trial. A carrying-weight rating would need separate evidence.

Request Samples

Buying Questions

Is a T-shirt bag a garment-packaging bag?

Here, T-shirt describes the carrier-bag shape. For packaging folded clothing, use our custom garment packaging enquiry.

Can I specify the required carrying load?

Include the expected contents and load in your brief. The proposed construction must be reviewed and any required performance evidence confirmed; a catalogue photo does not establish a load rating.

Are all pictured colours standard supply options?

No. Catalogue colour descriptions and custom artwork concepts are separate. Confirm the colour reference and availability with the selected configuration.

Is handle height included in the length?

Agree this on the drawing. Report body length and handle height as separate measurements so the usable space can be compared.

What should a sample carry?

Use representative goods with the expected shape and weight. Check insertion, handle comfort and handling at the counter.

Choose Your Carrier-Bag Format

Include the reference, quantity unit, artwork and destination. Photos and drawings can be sent by email.